Krohne OPTIFLEX 1300C EN User Manual download pdf (Page 63)

START-UP 5

OPTIFLEX 1300 C

www.krohne.com03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en

5.3.4 How to start the device

• Connect the converter to the power supply.

• Energize the converter.

i After 30 seconds the screen will display "booting up", "starting up" and then the default

screen will appear.

• The device will display readings.

i Measurements agree with specifications given in the customer order.

5.4 Remote communication with PACTware™

PACTware™ displays measurement information clearly and lets you configure the device from a

remote location. It is an Open Source, open configuration software for all field devices. It uses

Field Device Tool (FDT) technology. FDT is a communication standard for sending information

between the system and the field device. This standard agrees with IEC 62453. Field devices are

easily integrated. Installation is supported by a user-friendly Wizard.

Install these software programs and equipment:

• Microsoft

.NET Framework version 1.1 or later.

• PACTware.

• HART

converter (USB, RS232...).

• The Device Type Manager for the device.

The software and installation instructions are given on the DVD-ROM supplied with the device.

You can also download the latest version of PACTware™ and the DTM from our website.

Refer also to the PACTware™ consortium site at http://www.pactware.com.

CAUTION!

If the manufacturer received information about the installation, the device will display readings

correctly. If not, refer to the quick setup procedures on page 73

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 191 192

No comments

Krohne OPTIFLEX 1300C EN User Manual Page 63